AEG Voxtel S100 User Manual page 28

28
Note:
The respective ringer melody will be played while browsing the melody
list.
OK
Press to confirm.
10.4.2 Set the ringer volume
Press and
OK
Press and
OK
Press and
ringer volume levels including "OFF").
Note:
The respective ringer volume will be played during your selection.
OK
Press to confirm.
10.4.3 De-register a handset
This operation should only be necessary if one of your handsets becomes
faulty or lost and needs to be replaced. You will need to enter the 4-digit
system PIN (Default PIN is 0000) in order to de-register a handset from the
base station. A de-registered handset will have the antenna flashing and
"--UNREG--" on the display.
Press and
OK
Press and
OK
Press and the display shows "PIN?---".
Enter the 4-digit system PIN.
OK
Press and the first handset number is displayed.
Press / to step through the list of registered handsets, and select
the number of the handset you want to de-register.
OK
Press to confirm, and the chosen handset will be de-registered.
10.4.4 Change the recall (flash) time
You may need to change the recall (flash) time if your phone is connected
to a PBX.
The recall time options are "SHORT" (the default value of 100ms), "MID"
(280ms) or "LOING" (600ms).
Press and
OK
Press and
/ to select "BS SET".
/ to select "RING VOL".
/ to select the desired ringer volume (a total of 6
/ to select "BS SET".
/ to select "DEL HS".
/ to select "BS SET".
/ to select "FLASH".