Caller Display (Network Dependent) - AEG Voxtel D135 User Manual

You can register additional handsets to have up to five handsets
per base unit, with each handset's number (1 to 5) shown on its
display. (Note: each handset can only be registered to one base.)
To register a new handset to your base:
• Press and hold
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must
be completed within this time.
M
• Press and
M
• Press to display "PIN?------".
• Enter the 4-digit system PIN (default 0000).
M
• Press to confirm, and the display will show "SEARCHING".
If the handset registration is successful, you will hear a confirmation
tone and the
The handset will automatically be allocated the next available handset
number. This handset number is shown in the handset display in
standby mode. If the handset registration is unsuccessful, the
still flash.
10

CALLER DISPLAY (NETWORK DEPENDENT)

10.1 Call List
This feature is available if you have subscribed to the Caller Line
Identification service from your telephone company. Your phone can
store up to 50 received calls with date/time information in the Call List.
The number will be shown on the LCD when the phone is ringing. If the
number matches with one of the entries in your Private Phonebook,
the caller's name stored in the private phonebook will be displayed
with the number. The handset will ring with melody associated with
that phonebook entry.
The call list information might not be available for every incoming call.
The callers might intentionally block their names and / or telephone
numbers.
Call log display screen messages
WITHHELD
on the base station for more than five seconds, to
.
to select "REGISTRATION".
will stop flashing.
The caller is blocking the telephone number.
15
will