Using Slow Mode - Gefen GTB-HD4K2K-148 User Manual

Operating the 1:8 Splitter for HDMI 4K x 2K
When set to slow switching mode, the 1:8 Splitter for HDMI 4K x 2K will follow the standard
authentication process, based on the HDMI and HDCP specifications. Slow mode is
recommended when the source does not support multiple devices.
1. Disconnect the power supply from the splitter.
Set the FST switch to the Slow position.
2.
3. Reconnect the power supply to the splitter.
If the FST switch is moved from the Fast position to the Slow position while the
splitter is powered, then power-cycle the splitter by disconnecting and reconnecting
the power supply in order for the change to take effect.

Using Slow Mode

page | 9
Setting the Switching Mode
Set to the
Slow position