Orbital Sanding - Worx Professional WU654 Safety And Operating Manual

Soft wood
Hardwood
Veneer
Aluminum
Steel
Rust removal from steel
Stainless steel
6
HAND GRIP AREA(See Fig. H)
The auxiliary handle makes possible comfortable handling and
optimum force application, especially for high material removal.
Operate the machine with your both hands.
7

ORBITAL SANDING

Guide your sander parallel to the working surface and move it in
circles or in a cross pattern. Do not tilt the tool in order to avoid
deep unwanted sanding marks. The amount of material removed is
determined by the speed of the sanding disc and the grit size used.
The speed of the sanding disc diminishes relative to the pressure
applied to the tool. For faster removal, do not increase pressure on
the tool, but use a coarser grit size.
8
SELECTING THE RIGHT GRADE OF SANDPAPER
• Different grades of sanding paper can be purchased from good DIY
shops. Available grades are Coarse, Medium and Fine.
• Use coarse grits to sand down rough finishes, medium grit to
60/240 5
60/180 5 Medium
240/320 4
80/240 4-5 Medium
60/240 4 Medium/Hard
40/120 6
120/240 4 Medium
F
Soft
Soft
Soft
H
11
G