Worx Professional WU654 Safety And Operating Manual page 10

take care that the latching lever engages. Then connect the hose of
a vacuum cleaner. First please turn on the vacuum cleaner, and then
turn on the sander. If you stop sanding, first turn off the sander, then
turn off your vacuum cleaner.
4
OPERATING THE SWITCH (See Fig. F)
a) ON /OFF SWITCH
Depress to start and release to stop your tool.
b) SWITCH LOCK-ON BUTTON (See Fig. F)
Depress on/off switch then lock-on button (3), release on/off
(2)
switch first and lock-on button second. Your switch is now locked
on for continuous use. To switch off your sander just depress and
release the on/off switch.
5
VARIABLE SPEED CONTROL (See Fig. G)
The unit is equipped with a variable speed control. This allows you to
adjust the speed in order to achieve different finishes.
Grain Rough
Material sanding/Fine
Paint roughing
Paint touch-up
Paint removial
Variable
Sanding
speed
plate
sanding control
180/400 3 Medium
120/240 5 Hard
40/80 4 Medium
F
H
10
1
G