Orbital Sanding - Worx WX638 Safety And Operating Manual

Sanding
metal and 120
steel
Sanding
180
plexiglass
3. DUST bOx (See fig. D, E)
A) ATTACH THE DUST bOx (See fig. D)
Your sander is equipped with a dust collection box. To
attach, slide the dust box onto the outlet piece and take
care that the dust box locks in the grooves of the outlet.
CAUTION: To prevent the possibility of sanding
dust or foreign body being thrown into your face
or eyes, never attempt to use your sander without the
dust box properly installed.
b) EMPTy DUST bOx (See fig. E)
For more efficient operation, empty dusts box every
5-10mins. This will permit the air to flow through the
box better. To empty the dust box, pull off the dust box
out of the dust extraction outlet directly and shake out
dust.
4. USING THE DUST ExTRACTION ADAPTER
(See fig. f, G)
Your sander is equipped with two dust extraction
adapters, which are designed for connecting the hose
of a vacuum cleaner.
If the vacuum hose is 35mm, insert the 35mm dust
adapter (a) directly into the rear dust outlet of sander
(See Fig. F).
If the vacuum hose is 32 mm, insert the 32 mm adapter
(b) into the back of 35mm adapter (a) (See Fig. G).
NOTE: Please pull the dust adapter to make sure
tightened securely on the dust outlet.
5. flUSH SANDING fACIlITy
Your sander can sand flush on three sides of the base
plate which allows easy access to corners and edges of
mouldings.

6. ORbITAl SANDING

Your sander operates in small circular rotations which
allow efficient material removal. Operate your sander
in long sweeping movements across your work piece
and even across the grain. For a finer finish, always use
a fine grain sanding paper and only move the sander in
the direction of the grit and never across the grain. Do
Finishing sander
240 9800~12000
400 6500~8700
D
E
F
G
WX638 WX638.1
WX640 WX640.1