Save/Reload Settings; Save Settings To File - LevelOne WAP-6110 User Manual

13

Save/Reload Settings

Option
Save Settings Save the Settings to a File
to File
Load Settings Load Settings from a File
from File
Reset Reset Settings to Factory Default
Settings to
Default
This page allows you save current settings to a file or reload the
settings from the file which was saved previously.
Besides, you could reset the current configuration to factory
default.
If you do make changes to the default configuration but then
wish to revert back to the original factory configuration, you can
do so by resetting the device to factory defaults.

Save Settings to File

It allows you save current settings to a file.
1. From the left-hand Management menu, click on Reset
factory default. The following page is displayed:
Figure 9:
Description
Reset to Defaults page
117