LevelOne WAP-6110 User Manual page 42

300mbps wireless poe access point
Hide thumbs Also See for WAP-6110:
Table of Contents

Advertisement

Option
WAN Port IP
DHCP Client
Address
LAN Port
Assigned static IP address:
IP Address
192.168.1.1
Subnet mask:
255.255.255.0
DHCP (Dynamic
DHCP server disabled
Host Configuration
Protocol)
Default Setting
Explanation/Instructions
This is the temporary public IP address of the WAN
port on the device. It is an unnumbered interface that
is replaced as soon as your ISP assigns a 'real' IP
address. See Network Settings -> WAN Interface.
This is the IP address of the LAN port on the device.
The LAN port connects the device to your Ethernet
network. Typically, you will not need to change this
address. See Network Settings -> LAN Interface.
The Wireless Gateway maintains a pool of private IP
addresses for dynamic assignment to your LAN
computers. To use this service, you must have set up
your computers to accept IP information dynamically,
as described in Configuring Ethernet PCs.
42

Advertisement

Table of Contents
loading

Table of Contents