Advertisement
Quick Links
Advertisement
Related Manuals for Navilock BT-399
Summary of Contents for Navilock BT-399
-
Page 1: Bluetooth Gps Receiver
60311-a 0560 R o H S 027 49 C o m p l i a n t Bluetooth GPS Receiver BT-399 User manual... - Page 2 C o m p l i a n t 1. Introduction The BT-399 is a Bluetooth GPS receiver with internal antenna and Sirf3 20 channel GPS chipset. The Bluetooth interface enables a connection to a PDA, SmartPhone, mobile phone or notebook. Due to its extremely compact design it acts as ideal companion on every tour.
- Page 3 Important health- and security information If you use this product you should take precautions to avoid damages and legal consequences. Follow precisely all security- and handling advice and keep it carefully. Pay attention to all warning notices in the manual and on the device. To avoid injury, electric shock, fire and damages on the device, please pay attention to the following notices.
- Page 4 Blinking, if battery status is not enough Blazing, when recharge the battery 4. Operating surrounding The BT-399 can be used under all common OS Systems as Bluetooth GPS receiver. Drivers are not required. 5. Application 5.1. For a Notebook with Bluetooth Turn the BT-399 on.
- Page 5 For devices based on Windows Mobile please note that an output connection for the GPS-receiver is already placed. If this is not the case, please provide a new output connection for BT-399 in the Bluetooth manager in the tab „ Com connections“. All free Com Ports are being offered.
- Page 6 W2K, XP, Windows Vista and WM5 – also usable for WM6. GPS Info is only a Testprogram and cannot be used for navigation or orientation. After testing it has to be closed! Please make sure on a Pocket PC that it is really closed and not still active in the background. It blocks the Com-Port and doesn´t give access to a navigation- or routing software on the Com-Port.
- Page 7 7.1 The device cannot be switched on. Check if the battery is fully charged. Plug the charger to BT-399 and into the socket. If the LED lights up in red. Wait for 10min. unplug the receiver and switch it on. If you can see some function as the green LED flashes, the battery was not fully charged.
- Page 8 There can be also reflections which can disturb the reception. 7.5. If you use the BT-399 for the first time, the first Satfix can take up to 30min. The same can happen when you use the receiver on another continent.
- Page 9 A member of the support team will take care of your problem and work on a solution. We hope you enjoy your Navilock product! 8. Technical data Chipset/type SiRF star III GSC3FLP Channels 20 channel Sensibility -158dBm Frequency L1, 1575.42MHz C/A Code 1.023MHz Chip Rate...
- Page 10 Mon. – Fri: 9:00am – 16:30 pm * A connection fee applies according to fee schedule of your local telephone provider. You can find current product information on our homepage: www.navilock.com Please send your repairing transmittals franked to this address: Navilock Repair Center...
- Page 11 Navilock is a registered trademark and cannot be used without the written permission of its trademark owner. In no case shall it be modified or amended. 14. Third party trademarks Marks, trademarks, products names and logos of third parties that are shown in this documentation are marks or trademarks of their respective owners.
- Page 12 WEEE-notice The WEEE (Waste Electrical and Electronic Equipment)-directive, which became effective as European law on February 13th 2003, resulted in an all out change in the disposal of disused electro devices. The primarily purpose of this directive is the avoidance of electrical waste (WEEE) and at the same time the support of recycling and other forms of recycling in order to reduce waste.
Need help?
Do you have a question about the BT-399 and is the answer not in the manual?
Questions and answers