Table of Contents
Advertisement
Canopy T1/E1 Multiplexer
2.5
CONFIGURATION PROCEDURES USING THE EMS
2.5.1
Logging into the System
If you are using the EMS to access the system, follow the steps below to log in:
1. Select the proper COM Port for your PC.
NOTE: COM1 through COM4 are supported.
2. Enter the User Name.
NOTE: The default username is admin. This value cannot be changed.
3. Enter the Password.
NOTE: The default password is 123. If the password has been changed, enter
the correct password.
4. Select the Login button to continue with the login.
NOTE: If the login is unsuccessful, the system will generate a pop-up error
window. You may return to the Login window to correct the data.
Once you are successfully logged in, the T1/E1 Multiplexer EMS Main Menu opens
(shown in
Figure
Issue 1
Procedure 14: Logging in using the EMS
Figure 18: Login dialogue box
19).
T1/E1 Multiplexer Release 3.1
June 2004
43 of 69
Page
Advertisement
Table of Contents
