Canopy T1/E1 Multiplexer
NOTE:
The time displayed at the top of this page is static unless your browser is
set to automatically refresh.
RECOMMENDATION:
Vary the days and times when you analyze the spectrum in an area.
The RF environment can change throughout the day or throughout the
week.
IMPORTANT!
In a network where VLAN tagging is applied, QoS information is displaced
in the frame structure. For this reason, the high-priority channel is not
available where VLAN tagging is applied.
CAUTION!
Selection of Low can cause a link to a distant BHS to drop. If a link drops
when Power Control is set to low, the link can be re-established by only
Ethernet access.
WARNING!
From this point until you remove power from the AP, stay at least as far
from the AP as the minimum separation distance specified.
Each of these types of admonitions has a general purpose that underlies the specific
information in the box. These purposes are indicated in
Issue 1
Figure 1: Examples of admonitions
T1/E1 Multiplexer Release 3.1
Table
2.
June 2004
8 of 69
Page