Page 1
Electric Pressure Washer 039-8557-8 OWNER’S MANUAL If you have any questions or comments, visit our website at www.simoniz.ca or call our toll-free hotline 1-866-4SIMONIZ (1-866-474-6664). PLEASE KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT. BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY AND RETAIN IT FOR FUTURE REFERENCE.
TECHNICAL SPECIFICATIONS Warranty is void if the equipment is used for commercial, rental or industrial purposes. If you have more questions, visit our website (www.simoniz.ca), or call 1-866-4SIMONIZ Pressure Washer Specifications (1-866-474-6664). Peak Pressure: 2000 PSI Rated Max.
IMPORTANT PRECAUTIONS – READ FIRST IMPORTANT PRECAUTIONS – READ FIRST Warnings WARNING - Risk of Injury Do Not Direct Discharge Stream at Persons. When using this product, basic precautions should always be followed: • High-pressure jet can be dangerous if misused. • Read all the instructions before using the product. • The jet must not be directed at persons, animals, electrical devices, or the unit itself. • Water spray must never be directed towards any electric wiring, devices or directly towards the pressure washer machine itself, or fatal electric shock may occur. WARNING - Risk of Explosion • To reduce the risk of injury, do not operate the machine near children.
SAFETY FEATURES & ELECTRICAL POWER INFORMATION PARTS LIST AND DIAGRAM The pressure washer is equipped with a stop device that will sense when the trigger on the gun is released. It will open the power circuit to the motor, and cause the pressure washer motor to stop.
ASSEMBLY AND OPERATING INSTRUCTIONS ASSEMBLY AND OPERATING INSTRUCTIONS Surface Preparation Before starting any cleaning task, it is important to inspect the area for objects that could create a hazard. Remove any objects from the work area that could be tripped over, such as Recommendation for toys or outdoor furniture.
Page 6
ASSEMBLY AND OPERATING INSTRUCTIONS ASSEMBLY AND OPERATING INSTRUCTIONS CAUTION Drain unit after each use (for storage): remove water connection, turn ON the machine for a few seconds and press gun trigger to bleed remaining water in the pump. Turn OFF immediately. Attach the garden hose to the water supply and turn water on.
ASSEMBLY AND OPERATING INSTRUCTIONS ASSEMBLY AND OPERATING INSTRUCTIONS WORKING WITH DETERGENTS Allow detergent to remain on the surface for a short time before rinsing. Do not allow Working with detergent ensures a quick soaking of the dirt, and allows the high-pressure detergent to dry on surface.
OPERATING INSTRUCTIONS WINTERIZING AND LONG-TERM STORAGE Optimum Winterizing Procedure CAUTION Winterizing your pressure washer will help protect it and prolong its life. We strongly Failure to clean properly will cause the detergent injection system to become recommend you follow the steps below using Pressure Washer Antifreeze (039-8602-0). clogged and inoperable. This will keep the internal parts lubricated, protect them from rust, and prevent the pump from freezing.
CLEANING AND MAINTENANCE TROUBLESHOOTING Connections Disconnect the machine from the power source before making any repairs. Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and lubricated with non-water soluble grease. Symptom Cause Solution Motor will not start. On/Off switch is in the Turn switch to the “ON”...
Broken O-ring or plastic Call Toll-Free Hotline. insert. IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT WWW.SIMONIZ.CA OR CALL CUSTOMER SERVICE AT 1-866-4SIMONIZ (1-866-474-6664) FOR HELP . Pump is noisy. Pump is sucking air. Check that hoses and fittings are airtight.
Need help?
Do you have a question about the 039-8557-8 and is the answer not in the manual?
Questions and answers