Page 1
If you require any help, please contact the customer service department at: Model no. XE26 1-866-474-6664 Version no. 00 Contact us for assistance; we’re here to help.
Table of Contents 1. I ..........................3 mportant recautIons 1.1 D ................................3 efInItIons 1.2 s ..............................3 afety arnIngs 1.3 I ..............................5 ntenDeD pplIcatIon 2. s ....................5 afety eatures anD lectrIcal nformatIon 2.1 e ..............................5 xtensIon orDs 3. e ............................6 xploDeD 4. p ..............................6 arts 5.
Important Precautions 1. I mportant recautIons 1.2 Safety Warnings IMPORTANT, RETAIN FOR FUTURE REFERENCE AND READ CAREFULLY! DANGER Do not attempt to install or operate this device until you have read To reduce the risk of fire, electric shock, explosion or injury to the safety instructions in this manual.
Page 4
Important Precautions 1. I mportant recautIons cont 1.2 Safety Warnings (cont.) CAUTION — USE WARNING — INJECTION HAZARD • Learn how to stop the device and release the pressure quickly. Familiarize yourself with the controls. • Equipment can cause serious injury if the spray penetrates •...
Please refer to the icons below for suggested WARNING applications. For questions regarding other uses, please refer to our website at www.simoniz.ca or call us at 1-866-474-6664. • Extension cords are not recommended unless they are plugged into a ground fault circuit-interrupter (GFCI) IMPORTANT —...
Exploded View / Parts List 3. e xploded 4. p arts Item # Part Name Qty. Part # Item # Part Name Qty. Part # Foam blaster XE20-060-0000 Hand crank XE01-020-0007 Pressure hose VE15-020-0004 Bottle holder XE20-000-0003 Water filter Pre-attached on the machine Gun holder XE20-000-0002 Cleaning...
Assembly Instructions 5. a ssembly nstructIons 5.1 Surface Preparation 5.4 Assembly Steps Before beginning any cleaning task, it is important to inspect the area for objects that could create a hazard. Remove any objects from the work area that could be tripped over, such as toys or outdoor furniture.
Page 8
Assembly Instructions 5. a (cont.) ssembly nstructIons 5.4 Assembly Steps (cont.) Connect garden hose to the inlet adaptor. Attach garden hose to water supply and turn water on. 0º 15º 40º The spray nozzles on 3-in-1 wand are selected with the desired spray pattern for the following purposes: •...
Page 9
Assembly Instructions 5. a (cont.) ssembly nstructIons 5.4 Assembly Steps (cont.) OFF (0) Plug the unit into an outlet. WARNING Make sure the main switch is in the OFF position. Make sure your hands are dry. Plug the unit into an outlet. Make sure the main switch is in OFF position.
Page 10
Assembly Instructions 5. a (cont.) ssembly nstructIons 5.4 Assembly Steps (cont.) Ä Ö PURGING ON (1) Turn the main switch to ON position and the pressure washer is ready to operate. Purge air by squeezing the trigger on the gun until there is a steady stream of water.
Operating Instructions 6. o peratIng nstructIons 6.1 Working with the Foam Blaster Working with a detergent ensures quick soaking of the dirt, and allows the high-pressure water to penetrate and remove the dirt more effectively. Always spray detergent on a dry surface, do not pre-soak the area.
Operating Instructions 6. o (cont.) peratIng nstructIons 6.2 Shutting Down and Cleaning Up 6.4 Warnings (Skip this step if you are not using detergent.) CAUTION When you finish using the foam blaster, fill the container with clean water and attach the foam blaster back onto Failure to clean foam blaster properly will cause the detegent the spray gun.
Winterizing and Long-Term Storage 7. w InterIzIng and torage 7.1 Optimum Winterizing Procedure CAUTION Winterizing your pressure washer will help protect and prolong Drain any remaining water from the gun assembly. Aim the its life. We strongly recommend you follow the below steps using gun downwards and pull the trigger.
Cleaning and Maintenance / Technical Specifications 8. c leanIng and aIntenance 8.1 Connections 8.3 Water Filter Screen The connections on the pressure washer’s hoses, gun, and spray wand should be cleaned and lubricated with non-water soluble grease regularly. 8.2 Cleaning the Nozzles The pressure washer is equipped with a water inlet screen to protect the pump.
Troubleshooting 10. t roubleshootIng Disconnect the device from the power source before making any Problem Cause Solution repairs. Output pressure Not enough inlet Turn faucet on fully. fluctuates high water supply. Check garden hose Problem Cause Solution and low. for kinks, leaks or The On/Off switch is The motor does Turn the switch to...
Page 16
Troubleshooting 10. t (cont.) roubleshootIng Problem Cause Solution Problem Cause Solution Turn the device OFF, The garden hose Loose fittings. Tighten fittings. Motor hums System has residual but fails to run pressure. pull the trigger on connection leaks. Missing/worn Insert new washer. (continued).
The warranty is void if the equipment is used for commercial, rental or industrial purposes. If you have further questions, please visit our website (www.simoniz.ca) or call 1-866-474-6664. Imported by Trileaf Distribution Trifeuil, Toronto, Canada M4S 2B8 IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, VISIT OUR WEBSITE AT WWW.SIMONIZ.CA...
Do not use the device under rain to avoid fatal electric shock. RISK OF INJURY Do not direct the water flow at people to avoid serious injury. RISK OF ELECTRIC SHOCK Never spray water towards any electric devices. 039-8064-0 ENGLISH XE26...
Need help?
Do you have a question about the XE26 and is the answer not in the manual?
Questions and answers