Table of Contents
Advertisement
Z I P P I E G S
E. ELEVATING AND 90º ELEVATING LEGRESTS
6
7
1. Attaching/Removal
a) Place swing-away pivot saddle (A) into the receiver on front frame tube with the
footrest facing outward from the frame.
b) Rotate the footrest inward until it locks into place on locking bolt.
c) To remove hanger, push release latch (B) toward the frame, rotate footrest outward,
and lift.
2. Elevating
a) To raise legrest, lift to desired position. Legrest will automatically lock in place.
b) To lower legrest, while seated in chair hold lever (C) down, lower legrest to desired
position, then release lever. Legrest will automatically lock in place.
F. KIDS & ADULT ANGLE ADJUSTABLE FOOTPLATE
8
9
1. Height Adjustment
a) Remove the retaining bolt from the frame tube (D).
b) Move footplate assembly to desired height.
c) Left and right footrest will normally be at equal height.
d) Replace and tighten bolt.
2. Angle Adjustment
a) Loosen fasteners (E) until the adjustable clamp and footplate rotate freely on the
mounting tube.
b) Adjust the angle of the footplate.
c) Tighten nuts.
3. Position Adjustment
a) Remove footplate fasteners (E).
b) Move footplate to the desired location.
c) Replace and tighten fasteners.
G. HEAVY DUTY LIFT-OFF HANGERS (70º, 80º)
1. Attaching/Removal
a) Place pivot saddle (F) into the receiver on front frame until locked in place.
b) To remove hanger, push release mechanism (G) and lift hanger off.
H. HANGER EXTENSIONS (2", 4")
1. Installing/Removal
a) Remove footplate by removing bolt (H).
b) Remove end cap (I).
c) Insert extension (J) into hanger and insert fastener (K).
d) Reattach footplate to extension by replacing bolt.
e) To remove extension, reverse this process.
930377 Rev. F
(Optional)
10
11
14
Elevating Legrest
6
A
C
B
90º Elevating Legrest
7
A
C
B
8
D
E
9
E
10
F
G
11
H
I
J
K
I X .
Advertisement
Table of Contents
