Configuring General Settings - HIKVISION Digital Video Recorder User Manual

9.1 Configuring General Settings

Purpose:
Network settings must be properly configured before you operate DVR over network.
Steps:
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
3. In the General Settings interface, you can configure the following settings: Working mode (applicable for
DS-8100HFHI-ST only), NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of DHCP to automatically obtain an IP
address and other network settings from that server.
The valid value of MTU is from 500 to 1500.
User Manual of Digital Video Recorder
DS-8100HFHI-ST
Other Models
Figure 9. 1 Network Settings Interface
123