Detecting Bad Sector - HIKVISION Digital Video Recorder User Manual

10.8 Detecting Bad Sector

Purpose:
You can detect the bad sector of the HDD to check the status of the HDD.
Steps:
1. Enter the HDD Detect interface.
Menu>HDD>HDD Detect
2. Click the Bad Sector Detection tab to enter the interface.
3. Select a HDD and click the Detect button to start detecting.
4. You can click the Pause button to pause the detection and click the Resume button to resume the detection.
5. If there is error information about the HDD, you can click the Error Info button to view the information.
User Manual of Digital Video Recorder
Figure 10. 23 Bad Sector Detection
Figure 10. 24 Bad Sector Detecting
154