Escene Sayhi ES220 User Manual page 54

51
OU=Development subtree only by entering providing the following search base:
OU=Development, O=COMPANY. Other examples see below.
Default Value: <blank>
Examples:
￠ o=UNIVERSITY OF NEW ORLEANS,c=US
￠ o=SFU,c=CA
￠ dc=escene,dc=cn
3.2.6 User Name
Description: This setting specifies the bind "Username" for LDAP servers.
Most LDAP servers allow anonymous binds in which case the setting can be left
blank. However if the LDAP server does not allow anonymous binds, you will need to
provide the Username and Password allowed to query the LDAP server.
Default Value: <blank>
3.2.7 Password
Description: This setting specifies the bind "Password" for LDAP servers. Escene
phones use "simple" authentication scheme for bind requests. This setting can be left
blank in case the server allows anonymous binds. Otherwise you will need to provide
the Password along with the Username in order to access the LDAP server.
Default Value: <blank>
3.2.8 Max.Hits(1~32000)
Description:
results to be returned by the LDAP server. If Max.hits is 0 or blank the
LDAP server will return all search results. Please note that a very large value of the
"Max. Hits"
should be
value for this setting is blank.
Default Value: 50
3.2.9 LDAP Name Attributes
Description: This setting can be used to specify the "name" attributes of each record
which are to be returned in the LDAP search results. This setting compresses the
search results, as the server only returns the attributes which are requested
by the Escene phone. The setting allows the user to configure multiple
space separated
Escene Communication
This setting specifies
will slow down the
configured according
name attributes. Please consult your system administrator
the maximum
LDAP lookup, therefore
to the available bandwidth. The default
ES220 IPPhone
number of search
the setting
www.escene.hk