Mobile Home Installation - Harman The Accentra Pellet Stove Installation & Operating Manual

The accentra pellet stove

Hide thumbs

Table Of Contents

Table of Contents

When installing the Accentra in a mobile home several

requirements must be followed:

1. The unit must be bolted to the floor. This can be done

with 1/4" lag screws through the 2 holes in the base plate

shown in Fig. 16

2. The unit must also be connected to outside air. See

page 15.

3. Floor protection and clearances must be followed as

shown on page 10.

4. Unit must be grounded to the metal frame of the

mobile home.

CAuTION: This appliance must be vented to

the outside.

Due to high temperatures, the Accentra should be

placed out of traffic and away from furniture and drap-

eries.

Children and adults should be alerted to the hazards

of high surface temperatures and should stay away to

avoid burn to skin and/or clothing.

Young children should be carefully supervised when

they are in the same room as the stove.

Clothing and other flammable materials should not be

placed on or near the Accentra Pellet Stove.

Installation and repair of the Accentra Pellet Stove

should be done by a qualified service person. The ap-

pliance should be inspected before use and at least

annually by a qualified service person. More frequent

cleaning will be required. It is imperative that control

compartments, burners, and circulating air passage-

ways of the Accentra be kept clean.

mObIlE/mANuFACTurEd hOmE rEgulATIONS

dO NOT AllOw INSTAllATION IN rOOmS

dESIgNATEd FOr SlEEPINg.

mObIlE hOmE INSTAllATION ShOuld bE dONE

IN ACCOrdANCE wITh ThE mANuFACTurEd

hOmE ANd SAFETY STANdArd (hud), CFr 3280,

PArT 24.

AFTEr ThE INSTAllATION IS COmPlETE

Before the first fire is lit, check and record the high

and low draft reading numbers on page 13. Make

adjustments to the low draft at this time, if necessary.