Hardware Installation - NST CPT2IP User Manual

3.1 Hardware installation

You should install your IP Camera's hardware according to the following step in order to
make sure the IP camera works properly. Especially, pay attention to IP camera's installation
environment.
1) IPCAM. Plug DC adapter with IP camera
I.Note: Please use supplied or approved DC adapteron of IP camera. Using DC
adapter without any certificate, may destroy IP camera.
2) Plug cable from IP camera, and the other end of cable should connect with DSL or router. In
addition, make sure power of IP camera works properly and IP camera and PC are in the same
Subnet Mask
3) When you use the CPT2IP for the first time, Unit should be set for DHCP
automatically. (Before using, please make sure " DHCP" Server function in LAN's
router has been opened, or Server system open " DHCP" Server function) It is very
Picture 4 Network connection sketch map
IPCAM User Manual
7