Table of Contents
Advertisement
Visit IP Camera in internet
5
5.1 Connect in the internet
Related setting and visit IP camera
5.2
1. If your IP camera is using a static IP, you just need to input this IP address and port into
browser,address bar and press enter you will land on the cameras homepage.
2. If you are using ADSL to dial-up and surf on line, you should obtain IP Camera Current WAN
IP Address or configured DDNS.
·There are three ways for you to obtain WAN IP Address
① Using mail to send internet IP function
After setting mail successfully, your IP should send mail to your receiver e-mail box when
Internet IP or port has changed. If it is dynamic IP, users need to input this IP address into the
browser to visit the IP camera.
② Finding your IP address of your PC over the WWW.
It is very easy for you to obtain your WAN'S IP address. You can open a browser in the
computer on the condition that the IP camera and PC have the same subnet. For example::
http://www.whatismyip.com.or
shows below.
③Obtain from router
We take" TP-Link " router as example
A.According to router's manual, we get Router's IP is
both admin.
Login in router,: Input 192.168.1.1 in the browser. Find the status of Router and find Router's WAN( In this
B.
example, WAN'S IP is 116.24.235.122； As shows in Picture 27.
Picture 25
http://www.myip.cn
etcs.，It will tell you WAN'S IP address as
picture 26
IPCAM User Manual
，User name and password are
192.168.1.1
19
Advertisement
Table of Contents
