Network Setting; Network Parameters - NST CPT2IP User Manual

8.2 Network Setting



8.2.1 Network parameters

If the router that the CPT2IP camera connects to via DHCP function, you can choice
"Obain IP from DHCP Server", or fill in the network parameters manually.
Http Port: In most cases, you can leave this value as 80, however, if your Internet
Service Provider blocks this port, you may switch to another port number such as,
Range from 0 to 65535, pay attention to the same segment of multiple devices must set
9000 Etcs. (
up different port. The port can't have any conflict with other software or equipment
a. Modify in LAN search tools
Choose IP Camera
b.The management authority user login into
the http port
Picture 54
then open
Here choose and set port of http
号
Picture 55
IPCAM User Manual
85，8080，8888，
Set Network IP address
Set port number
号
change
31