Table of Contents
Advertisement
3、How to set DDNS on line?
The first way：Menu "start"- "run"—> Input CMD，Clink "enter"。It can check
Through the PING command, this dynamic domain name can be back in the network response
information. It proves that the domain name has been online.
If the domain name update not success! Possible reasons: (1) DDNS parameter is not correct. (2)
may cause: DNS address configuration is wrong.
9.2 Frequently Asked Questions
1）Any questions that you may have, please check Network connections first.
2）Check the status revealed by the Network Servers indicators, hub, exchange and network card.
If abnormal, check the network connections.
9.2.1 have forgotten the username and/or password
To reset the administrator username and password, Press and hold down the RESET BUTTON for 5
seconds. Release the power button and the username and password,will be reset back to the factory
default administrator username and password.
Default administrator username: admin
Default administrator password: admin
9.2.2 IP Address configuration
Check whether IP address of the IP Camera server shares the same subnet as your work
station:Your PC may be running a different OS, follow if applies; Click My Computer > Control
Panel>Network & Dial-up Connections > LAN > Attributes >Internet Protocols (TCP/IP), and check IP
Address and Subnet Mask. Make sure they are in the same subnet when configuring IP Camera IP address
manually. Unable to access IP Camera via web browser.
Figure79
DDNS Statas via. As shown below：
Figure80
IPCAM User Manual
42
Advertisement
Table of Contents
