Control Area; Functions And Setting Area - NST CPT2IP User Manual

4.4.3 Control Area

Adjust and controls image parameters and is also the contoller for PTZ functions and the cameras settings
selector buttons.
『 Control』 ：
click different direction, ip camera turns accordingly
PT
Stop PT
『 Image flip 』 ：
Image fluctuation flip(up and down).
『 』 ：
ZOOM
/
『 IO output switch 』 ：
『 PTZ speed 』 ：
『 Preset』 ：
Set
『 』 ：
Video resolution
Please choose 50hz/60hz according to the power frequency in which the
『 』 ：
Model
users are located. 60Hz is USA.
『
Brightness and contrast
『
Restore the default value
Note
:
Name format of video file: Chn0—IP address--. the current time V264
file

4.4.4 functions and setting area

Drop down menu containing options to
『 』：
System
device time, user management, miscellaneous, firmware upgrade and reset settings .
『
Network functions setting
『
Audio and video Settings
『 』 :
Alarm settings containing motion detection and alarm input, sound detection and
alarm output! For details, please refer to other settings of Part 7.
.
Zoom optical zoom lens
I/O output Switch on /off..
PTZ speed increase from left to right.
Represent which preset has been choosen、run current
preset、 Set preset, and delete current preset！
can choose from three different resolutions to watch the
video
』 ：
』 ：
』 ：
containing network parameters, wireless network card,
DDNS, SMTP, and PT settings.
』
containing image coding parameters, the OSD settings,
:
video scheduling and network storage settings.
Image around flip (right and left)
！
Regulate image effect according to the requirement
of the users desired image.
Click here to restore to the default value
check system status, related settings, ,
IPCAM User Manual
，
automatic
PT
18
.