Table of Contents
Advertisement
6-3-2
Special Functions
Test Function
The K3TS Intelligent Signal Processor is provided with two special functions:
test mode and teaching function.
1.
Test function: This function is convenient for checking a system to which
the Intelligent Signal Processor is connected, especially when some in-
puts cannot be operated. The Intelligent Signal Processor simulates the
input, changing the display and output conditions.
2.
Teaching function: This function allows the measured values to be re-
trieved and set as comparative outputs and as a linear output range
while actual measurement is being carried out. This function is useful for
setting parameters while checking the operating status of the Intelligent
Signal Processor.
The Intelligent Signal Processor is provided with a test function in which sim-
ulated signals can be input. When a simulated input signal is applied, an ac-
tual corresponding output signal is issued. Confirm the status of the equip-
ment connected to the output side of the Intelligent Signal Processor.
Section 6-3
Advertisement
Table of Contents
