Pre-Use Checklist - Harman Super-Magnum Coal Stoker Stove Owner's Manual Installation And Operation

D. Pre- Use Check List
1. Place the appliance in a location near the
final installation and follow the procedures
below:
2. Open the appliance and remove all articles
packed inside. Inspect all items for shipping
damage. Notify dealer of any missing or
damaged goods.
3. All safety warnings have been read and
followed precisely.
4. This Owner's Manual has been read in it's
entirety.
5. Floor protection requirements have been
read and followed.
6. The flue connector has been installed in
accordance with the instructions herein.
7. The proper clearances from the appliance
and chimney connector to combustibles
have been met.
8. The masonry chimney has been cleaned
and inspected by a professional, or the
factory built metal chimney is installed
according to the manufacturers instructions.
9. The chimney meets the minimum height
requirements.
10. All labels and hang tags have been removed
from the glass.
11. All plated surfaces have been wiped clean,
if applicable.
12. The room sensor and any additional cable
has been installed properly.
13. A properly grounded electrical receptacle is
available within reach of the unit's power
cord.
8
Do Not Burn Wet Coal!
Super-Magnum Coal Stoker Stove
WARNING
Inspect appliance and components for
damage. Damaged parts may impair safe
operation.
• Do NOT install damaged components.
• Do NOT install incomplete components.
• Do NOT install substitute components.
Report damaged parts to dealer.
WARNING
Fire Risk
Hearth & Home Technologies disclaims
any responsibility for, and the warranty
will be voided by, the following actions:
• Installation and use of any damaged appliance.
• Modification of the appliance.
• Installation other than as instructed by Hearth &
Home Technologies.
• Operating appliance without fully assembling all
components.
• Operating appliance without legs attached.
• Do NOT Overfire.
Or any such action that may cause a fire hazard.
3-90-02702R4_08/12