Table of Contents
Advertisement
Setting LavaPort Flow Control in Windows
Flow Control refers to the type of signaling that is used between the
modem and the LavaPort.
If you are connecting the LavaPort to a modem or ISDN terminal
adapter, use the default setting of Hardware (RTS/CTS) flow control.
Software Flow Control (Xon/Xoff ) is used only for connecting the
LavaPort to a non-modem serial device (e.g. Using a null-modem cable
to connect to another Com Port).
17
Advertisement
Table of Contents
Need help?
Do you have a question about the LavaPort-Quad and is the answer not in the manual?