DSerial-PCI Powered,, consult Lava Technical Support. Windows NT 4.0 Installation 1. With the power turned off, insert the DSerial-PCI Powered card into any free PCI slot in your PC. Boot NT logging on as “Administrator” . Place the DSerial-PCI...
Page 3
“LavaPort” .This applet should now be used to configure ALL Com Ports in your PC – not just Lava serial ports. Please note that Com 1 may not appear in this applet if you have your mouse attached to Com 1.
Page 4
Windows 95/98/Me/2000/XP Installation 1. With the power turned off, insert the DSerial-PCI Powered card into any free PCI slot in your PC. Make sure the card is well seated. Turn your PC on and start Windows. 2. Windows will automatically detect the DSerial-PCI Powered as a new PCI Serial Controller and ask you to insert the Installation...
Page 5
The DSerial-PCI Powered hardware appears in Device Manager in two places: under the Multi-function adapters tree and as part of the Ports tree. Please note that any changes to the resources (I/O address and IRQ) used by either of the two ports on the DSerial- Powered must be made through the Resources page of the DSerial-PCI...
Page 6
DSerial-PCI Powered (e.g. Assign Port 1 to be Com 3), please use the Lava Com Port Redirect Utility included in the “Utils“ subdirectory of your Installation Diskette.This may be necessary because some communications applications programs do not recognize port designations beyond Com 4.The Lava Com Port Redirect...
Page 7
Changing the Com numbering of your ports in Windows 2000/XP In Windows 2000 and Windows XP, Com port numbering can be changed by double-clicking the DSerial-PCI Powered entry displayed in Windows' Device Manager (as described earlier). Go to Settings | Advanced, and choose the Com port number you want.
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Lava Computer MFG Inc. 908 Niagara Falls Blvd. #629. North Tonawanda NY 14120-2060...