Configure Phone To Register Sip Account; Network Configuration - ATCOM Rainbow2 Quick Start Manual

Rainbow2 Quick Start Guide

2. Configure phone to register SIP account

2.1

Network Configuration

LAN Port Configuration
Enter "Network" -> "Basic" page.
There are 3 ways to connect to internet DHCP, Static and PPPoE, please choose
one according to your own situation.
Network mode: you can choose DHCP, Static and PPPoE

DHCP: Rainbow2 default to use DHCP to obtain IP from DHCP Server.

Static: If you want to set the IP as static, you should fill IP, Netmask,

Gateway and DNS information.
PPPoE: If Rainbow2 is connected to the modem, you should fill ADSL

account and password which are assigned by your network service provider.
Password Configuration
Enter "Network" -> "Advance" page.
There are 2 modes to set the authority of web accessing and command line:
User mode and Admin mode. All the parameters can be visible and changed in
Admin mode while part of them can be visible in User mode.
ATCOM TECHNOLOGY CO., LIMITED