Removing Nails, Directional Exhaust - Bostitch N88WW Operation And Maintenance Manual

FASTENER DEPTH CONTROL ADJUSTMENT
The Fastener Depth Control Adjustment feature provides control of the nail drive depth from flush with or just above the
work surface to shallow or deep countersink.
TO ADJUST THE FASTENER
DEPTH CONTROL:
DISCONNECT TOOL FROM AIR SUPPLY BEFORE ATTEMPTING
ANY PARTS DISASSEMBLY AND BEFORE CHANGING THE WORK
CONTACTING ELEMENT ADJUSTMENT.
1. Push in on locking button.
2. Adjust contact arm up to increase
depth of drive or down to decrease it.
3. Release locking button
Exhaust Deflector
N88WW
PUSHER LEVER
NAIL STOP
N88RH
1. Pull pusher back until it engages latch.
2. Slide nails back to opening and push out.
DIRECTIONAL EXHAUST DEFLECTOR
The adjustable exhaust deflector can be
rotated into any desired position by hand
without the use of any tools.
NOTE: N88 Series share the same tool
free adjustable exhaust deflector.
1. Push down on pusher lever
2. Allow pusher spring to pull the pusher
PUSHER
3. Slide the nails back to the nail stop
4. Push down on
the nail stop
-7-
ADJUST
REMOVING NAILS
forward until it stops in the forward
position
PUSH IN
RELEASE
LOCKING BUTTON
CONTACT ARM
5. Slide the nails out
of the magazine
2
1