Usb Ports (Cn6,Cn63,Cn66,Cn67); Vga Connector Cn7 - Advantech PCA-6190 User Manual

Lga775 pentium 4/celeron d processor card with vga/dual gigabit lan/hisa/dvi (800 mhz fsb)

Table of Contents

The parallel port is designated as LPT1, and can be disabled or changed

to LPT2 or LPT3 in the system BIOS setup.

To install the bracket, find an empty slot in your chassis. Unscrew the

plate that covers the end of the slot. Screw in the bracket in place of the

plate. Next, attach the flat-cable connector to CN4 on the CPU card. Wire

1 of the cable is red or blue, and the other wires are gray. Make sure that

wire 1 corresponds to pin 1 of CN4. Pin 1 is on the upper right side of

CN4.

2.5 USB Ports (CN6,CN63,CN66,CN67)

The PCA-6190 provides up to eight ports of USB (Universal Serial

Bus)interface.The USB interface complies with USB Specification Rev.

2.0 support transmission rate up to 480 Mbps and is fuse-protected. The

USB interface can be disabled in the system BIOS setup. To install the

USB cable (p/n:1700000719) bracket, find an empty slot in your chassis

and . Unscrew the plate that covers the end of the slot. Screw in the

bracket in place of the plate. Next, attach the USB connector to CN6,

CN63, CN66, or CN67.

PCA-6190

User's Manual

Table of Contents