Sirius XM RAdio Onyx EZ User Manual page 41

Vehicle Installation
channel is one that's not being used by an FM radio station in your
area . When you tune your FM radio to an available channel, you should
only hear static or silence – not talk or music . To find an available FM
channel:
• Manually tune through your local FM channels on your vehicle's FM
radio . Locate and create a list of channels that aren't being used by
any FM radio station . Write down the list . Once you have created
your list of available FM channels, you will need to find the one that
provides the best match for Onyx EZ .
TIP! You'll need to use the 'Manual' tune function on your vehicle's FM radio to
tune through every FM channel one-by-one . Turn on your vehicle's FM radio .
Start at 88 . 1 and use the 'Manual' tune function on your vehicle's FM radio to
tune through each FM channel one-by-one (88 . 1 followed by 88 .3 etc .) to locate
channels that aren't being used by a local FM radio station . Write down each FM
channel that has only static or silence on it, until you reach 107 . 9 .
6 Ensure Onyx EZ is tuned to channel 1 . Upon power up, Onyx EZ should
tune to channel 1 by default, when it's not yet activated . If it's not on
channel 1, refer to "Listening to Satellite Radio" on page 50 to learn
about how to tune a channel .
7 Pick the first FM channel on your list from step 5 . Turn on your vehicle's
FM radio (if you have not already done so) and tune it to this FM channel .
41