Sirius XM RAdio Onyx EZ User Manual page 13

Vehicle Installation
vehicle . When the orientation is correct, tighten the knob .
Knob
4 . Attach the Dash Mount to the PowerConnect Vehicle Dock using the 4
provided screws .
5 . Before you attach the Dash Mount to the
dash, skip ahead and finish the remainder of
the vehicle installation so that the cables are
attached to the dock .
6 . Once the cables have been attached to the
dock, clean the mounting surface in the
vehicle with the alcohol preparation pad and
let it dry thoroughly .
7 . Peel off the adhesive liner .
Position, press, and hold the
Dash Mount in place for 30
seconds .
IMPORTANT! Allow the Dash Mount
adhesive to cure (dry) for a minimum of
2-4 hours before using the mount . The
best adhesion occurs after 24 hours .
TIP! To remove the Dash Mount, carefully lift the adhesive pad with your fingers
or a spoon . Warming the pad with a hair dryer for several minutes will help soften
the adhesive .
Adhesive Foot
Dock Mounting Plate
13