Sirius XM RAdio Onyx EZ User Manual page 39

Vehicle Installation
Press the Select button . The
Satellite and Terrestrial bars show
the strength of the signal being
received . If the signal reception is
good, press and hold menu to return
to the main display screen .
7 . Ensure Onyx EZ is tuned to channel
1 . Upon power up, Onyx EZ should
tune to channel 1 by default, when
it's not yet activated . If it's not on
channel 1, refer to "Listening to Satellite Radio" on page 50 to learn
about how to tune a channel .
8 . If you haven't done so, turn on your vehicle's stereo system . Set it to
play input from the cassette source .
9 . You should hear XM channel 1 through your vehicle's stereo system .
You are now ready to activate your Onyx EZ .
10 . Go back to "Step 2: Install the Dash or Vent Mount" on page 12
and finish installing the Dash or Vent Mount . Then the installation is
complete .
11 . The audio level output of the Onyx EZ can be increased or decreased
as necessary to match the audio levels of other sources in your
vehicle . Refer to "Set Audio Level" on page 70 .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle's stereo system is set to the correct source, i .e ., cassette source
(step 8) . Also be sure that the audio level is set high enough to be heard (step 10) .
Refer to "Troubleshooting" on page 80 for additional help .
Signal Indicator
SATELLITE
-
TERRESTRIAL
-
+
+
39