Sirius XM RAdio Onyx EZ User Manual page 37

Vehicle Installation
screen that denotes antenna signal
strength . You can also press menu
and then press
highlight Signal Indicator . Press the
Select button . The Satellite and
Terrestrial bars show the strength of
the signal being received . If the
signal reception is good, press and
hold menu to return to the main
display screen .
7 . Ensure Onyx EZ is tuned to channel
1 . Upon power up, Onyx EZ should tune to channel 1 by default, when
it's not yet activated . If it's not on channel 1, refer to "Listening to
Satellite Radio" on page 50 to learn about how to tune a channel .
8 . Turn on your vehicle's stereo system . Set it to play input from the
auxiliary input source .
9 . You should hear XM channel 1 through your vehicle's stereo system .
You are now ready to activate your Onyx EZ .
10 . Go back to "Step 2: Install the Dash or Vent Mount" on page 12
and finish installing the Dash or Vent Mount . Then the installation is
complete .
11 . The audio level output of the Onyx EZ can be increased or decreased
as necessary to match the audio levels of other sources in your vehicle .
Refer to "Set Audio Level" on page 70 .
If the signal reception is good, but there is no audio when tuned to channel 1, be
sure the vehicle's stereo system is set to the correct source, i .e ., auxiliary input
source (step 8) . Also be sure that the audio level is set high enough to be heard
(step 10) . Refer to "Troubleshooting" on page 80 for additional help .
to scroll to and
Signal Indicator
SATELLITE
-
TERRESTRIAL
-
+
+
37