Motorola Astro Digital Saber II User Manual page 71

Motorola astro digital saber portable radio user's guide
Table of Contents

Advertisement

Additional Information
Sound
Continuous,
Medium-Pitched
Tone
A Group of
Medium-Pitched
Tones
Short,
High-Pitched
Tone
(Chirp)
Continuous,
High-Pitched
Tone
A Group of
High-Pitched
Tones
Ringing
Gurgle
68
Tone Name
Volume Set
Emergency Exit
PTT Sidetone
Failsoft
Automatic Call
Back
Talk Permit
Dispatcher-
Interrupter
Keyfail
Console
Acknowledge
Received
Individual Call
Call Alert Sent
Low-Battery
Chirp
Phone Dekey
Chirp
Quik-Call™
Group Call
Quik-Call
Individual Call
Phone Ringing
Enhanced Call
Received
Dynamic
Regrouping/Over-
The-Air
Programming
Occurs:
when volume changed on a quiet
channel
upon exiting the emergency state
when data is sent by pressing the PTT
switch, but the user must wait to talk
when system fails
when voice channel is available from
previous request
upon pressing the PTT switch;
verifying system accepting
transmissions
Upon receipt of a dispatcher-
interrupt call
when an encryption key has been
lost
when a status, message, emergency
alarm, or reprogram request ACK is
received
when a Call Alert or Private
Conversation call is received
when a Call Alert is received by the
target radio
when battery is below preset
threshold value
from radio to phone line upon
releasing the PTT switch
when a Quik-Call group call is
received
when a Quik-Call individual call is
received
when a phone call is received
when originator receives ACK from
an enhanced private call
when a dynamic ID has been received
and the PTT switch is pressed and the
reprogrammed group has not been
selected and when the radio is
successfully re-keyed

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Astro digital saber iii

Table of Contents