Motorola Astro Digital Saber II User Manual page 33

Common Radio Features
3. The last acknowledged status call or the first message in the message list
will be displayed.
If no status has been acknowledged, the first status in the status
Note
list will be displayed.
4a. Scroll through the list by pressing
or
the predefined condition you wish
to send.
Backward
FIRST
LIST
LAST
5. When you locate the condition you want to send,
press the PTT Switch.
6. Upon receipt of the data call, the dispatcher will
transmit an acknowledge to your radio. Your radio
will then beep four times, display "ACKNOWLEDGE,"
and then return to normal dispatch operation.
If the system does not acknowledge the data call, your radio will
alternately display "NO ACKNOWLEDGE" and the currently selected
predefined condition.
7. Press to exit the data-call feature and return to the home display.
HOME
Notes
• While the data-call feature is selected, you will not hear normal radio
communications.
• If the data-call feature (
six seconds, an alert tone will sound to indicate to you that the data-call
feature is active. The alert tone will stop when
pressed.
30
until you locate
FIRST
LIST
LAST
Forward
or
4b. Go directly to a specific
predefined condition in the
list by entering the number
that corresponds to that
condition's placement in the
list.
OR
1 2
ABC
4 5
GHI JKL
7 8
PRS TUV
0
) is selected and no activity occurs for
or the PTT Switch is
HOME
3
DEF
6
MNO
9
WXY