Motorola Astro Digital Saber II User Manual page 20

• Changing (Reprogramming) a List
Notes
• Only numbers can be changed (reprogrammed) in a list. To change
the names in a list, a qualified service center must reprogram your
radio using radio service software. A name can be a maximum of 14
characters.
• If you are using the scan feature, refer to page 46 for scan-list
reprogramming.
1. Press until the
display. (The exact location of softkeys will vary
based upon individual radio programming.)
2. Press directly below
3. The display changes to show the lists (
, , etc.) that can be changed.
4. Press directly below the list you wish to
change. For example, to change a telephone
number, press
5. The display will show the first member in the list (name on the upper
line, number on the lower line). The
(flashing), indicating you are in the programming mode.
First Member in the List
softkey appears on the
.
directly below
General Radio Operation
HOME
,
HOME
.
status indicator will appear
Flashing = Programming Mode
HOME
17