4a. Press
until the desired zone
name appears on the display.
HOME
If the selected zone is unprogrammed, the display will show
Note
"UNPROGRAMMED" until a valid programmed zone is selected.
This does not mean your radio is unprogrammed; only the zone
you selected is unprogrammed.
5a. To select the displayed zone/
channel combination, press
.
HOME
HOME
If you would like a different channel within the selected zone, see
Note
"Channel Selection" below.
• Channel Selection
(Consult your service technician to determine which one of the following
methods to use for channel selection.)
Method 1 Channel Selection — used when the 16-Position Select Knob is
programmed for channel selection.
1.
Once you have a desired zone displayed
(step 4 of zone selection), rotate the 16-
Position Select Knob to the desired channel.
The display changes to show the selected
channel.
General Radio Operation
4b. Enter the number of the
desired zone.
1
OR
4
GHI
7
PRS
5b. To transmit on the displayed
zone/channel combination,
press the PTT Switch.
OR
Select
Channel
2
3
ABC
DEF
5
6
JKL
MNO
8
9
TUV
WXY
0
13