Motorola Astro Digital Saber II User Manual page 29

General Radio Operation
7. The display will then show "CONFIRM."
8. Re-enter the new password and press
9a. If the two passwords match,
the radio will unlock.
• Radio-Lock Enable/Disable (Secure Radios Only)
This feature (programmable through radio service software) allows you to
enable/disable the radio-lock feature using the radio's keypad.
To Enable or Disable the Radio-Lock Feature:
1. Press until the
2. Press directly below
3. The display changes to show the current selected state, "PASSWD
ENABLED" or "PASSWD DISABLD."
4a. To enable the radio-lock feature,
press directly below
26
directly below
9b. If the two passwords don't match, the
display will show "NEW
PASSWORD." You then need to
repeat the previous steps.
You cannot change your
Note
password if you have
entered three incorrect old
passwords. The radio will
exit the radio-lock feature
and will not allow you to
press the
related button again until
the radio is turned off and
on again.
softkey appears on the display.
.
OR
4b. To disable the radio-lock
. feature, press
below
.
softkey-
directly
.