Ricoh SP C250SF Operating Instructions Manual page 337

Message
Available: 2 Sided 2-sided copy could not be
Copy performed because the tray
A4/B5/LG/LT/EXE does not contain the valid size
8x13/8.25x13/8.5 paper, which are A4, B5, Letter,
x13/16K Legal, Executive, 8 × 13 inches,
8
16K.
Available: 2 Sided 2-sided copy could not be
Copy Tray 1 or Tray performed because paper is
2 specified to be fed from the
bypass tray.
Available: IDCard ID card copy could not be
Copy A4 or 8 1/2 x performed because the tray
11 does not contain the valid size
paper, which are A4 or Letter
size.
Open Frt. Cvr. then The fusing unit levers are not
move Env Lvr positioned correctly.
up/dwn
Causes
1
/ × 13 inches, Folio, or
2
Error and Status Messages on the Screen
Solutions
• Select the tray containing the A4, B5,
Letter, Legal, or Executive size paper
(other than the bypass tray) in the
[Select Paper] setting. See page 193
"Copier Features Settings".
• Specify the A4, B5, Letter, Legal,
Executive, 8 × 13 inches, 8
inches, Folio, or 16K size for the tray
selected for printing copies. See
page 215 "Tray Paper Settings".
Specify a setting other than [Bypass Tray]
for the [Select Paper] setting. See
page 193 "Copier Features Settings".
• Using the machine's control panel,
specify [Select Paper] to print copies
using the A4 or Letter size paper. See
page 193 "Copier Features Settings".
• Select the A4 or Letter size paper for
the tray selected for printing copies.
See page 215 "Tray Paper Settings".
The machine can start printing only if the
fusing unit levers are in the correct
positions for the paper type.
• To print on an envelope, open the
front cover, and then lower the left
and right levers to the envelope mark.
• To print on paper, open the front
cover, and then raise the left and right
levers to the plain paper mark.
1
/ × 13
2
335