Ricoh SP C250SF Operating Instructions Manual page 307

Problem
The volume of the sounds
produced by the machine is too
loud.
The volume of the sounds
produced by the machine is too
low.
• If any of these problems persist, turn off the power, pull out the power cord, and contact your sales
or service representative.
Possible cause
The volume is set to the high
level.
The volume is muted or set to the
low level.
Common Problems
Solution
Adjust the volume of the beep,
ring, speaker, and alarm
sounds. For details, see
page 209 "System Settings".
Adjust the volume of the beep,
ring, speaker, and alarm
sounds. For details, see
page 209 "System Settings".
305