Ricoh SP C250SF Operating Instructions Manual page 205

Default: 15 seconds
• 5 to 99 seconds, 1 second increments
• Authorized Reception
Sets the machine to receive (or reject) faxes only from the programmed Special Senders. This
helps you screen out unwanted documents, such as junk faxes, and prevents the wasting of
fax paper.
Default: [Inactive]
• Active
• Inactive
• Auth.RX: Receive Conditions
Specifies whether to receive or reject faxes from the programmed Special Senders.
This setting is available when [Authorized Reception] is enabled.
Default: [Special Sender]
• Special Sender
Receive faxes from the Special Senders and reject faxes from all other senders.
• Other Than Special Sender
Reject faxes from the Special Senders and receive faxes from all other senders.
• Reception File Setting
Sets the machine to store received faxes into memory for printing or forward them to a preset
destination.
Use Web Image Monitor to specify the forwarding destination (for details, see page 245
"Fax Tab").
This setting appears only for the Type 2 model.
Default: [Print]
• Print
• Forward
• Print Received File
Sets the machine to automatically print the faxes received into memory or store them for later
manual printing.
This setting appears only for the Type 2 model.
Default: [On]
• On
Automatically print out the received faxes and delete from memory.
The machine prints out the received faxes and deletes them from memory within the
specified time.
Fax Features Settings
203