Ricoh SP C250SF Operating Instructions Manual page 214

7. Configuring the Machine Using the Control Panel
Supplies Status
Displays information about consumables.
• Toner
• Black
• Magenta
• Cyan
• Yellow
The level indicator (black squares) indicates the remaining life. You need to replace the
consumable when the level is zero (completely white).
• Other Supplies
The information about intermediate transfer roller, fusing unit, and Intermediate Transfer Belt
appear only for the Type 2 model.
• Waste Toner Bottle:
[Waste Toner Bottle: Full] (Usable), [WasteTnr.Bttl.: AlmostFull] (Almost full and needs
replacing soon), [Waste Toner Bottle: Ready] (Needs replacing)
• Fusing Unit:
Displays the remaining life of the fusing unit.
• IntTrans. Belt
Displays the remaining life of the Intermediate Transfer Belt.
• Transfer Roller:
Displays the remaining life of the transfer roller.
The level indicator (black squares) indicates the remaining life. You need to replace the
consumable when the level is zero (completely white).
Anti-Humidity Level
Sets the machine to produce prints in consistent quality even when humidity is high.
Note that the default value for this setting will not be restored by performing [Reset All Settings]
under [Admin. Tools] or [Reset Menu Settings] under [Administrator Tools] of Web Image Monitor.
Default: [Off]
• Off
• Lvl.1: Weak
Select this mode if printouts are blurred.
• Lvl.2: Medium
Select this mode if printouts are curled and/or blurred. Note that if you select this mode, the
first print takes longer than subsequent prints to be complete.
• Lvl.3: Strong
212