Optimise Standby; Check Filters - Miele HG05 Operating Instructions Manual

Settings menu

Optimise standby

The dishwasher is supplied with the
function set as standard.
timise standby
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off in‐
creases to 6 hours. Doing this will in‐
crease energy consumption.
 Select the setting you want and con‐
firm with OK.
90
Refill reminders
If you only ever use combination prod‐
Op-
ucts containing salt and rinse aid in
your dishwasher, you can switch the re‐
minders for salt and rinse aid off if you
wish (see "Settings menu - Refill re‐
minders"). Switching off the reminders
will not affect the DetergentAgent func‐
tion (see "Programme options, Deter‐
gentAgent").
 Select the setting you want and con‐
firm with
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the re‐
minders back on.

Check filters

You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 programme cycles.
The reminder to check the filters is set
at the factory to appear after every 50
programme cycles.
 Select the interval you want and con‐
firm with
.
OK
.
OK