Settings menu
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
If the function to adjust the Sensor
wash programme has been activated,
the amount of rinse aid dispensed in
the
programme can be
Sensor wash
higher than that set.
If spots appear on crockery and glass‐
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Use the arrow sensors to set the
rinse aid dosage and confirm with
.
OK
88
Consumption (EcoFeedback)
You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the to‐
tal energy and water used in all previ‐
ous dishwasher programmes (see "Car‐
ing for the environment, EcoFeedback
consumption indicator").
Consumption indicator
Select the
Display consumption
Select the setting you want and con‐
firm with
.
OK
Total consumption
You can display the values for
and
.
Water
Select the
Total consumption
You can also reset the values for the to‐
tal consumption to 0.
Select the
Reset
Select the
Yes
Confirm the message with
The values are now reset to 0.
option.
Energy
option.
option.
option.
.
OK