Display
General
The display is used to select or set the
following:
– the programme
– any extras
– the delay start function
– the
menu
Settings
– information
The display can show the following:
– the programme name
– the stage the programme is at
– the current time of day
– the estimated time left for the pro‐
gramme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and in‐
formation
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
To switch the dishwasher back on
again, press the sensor.
Guide to the appliance
The scroll bar on the right of the dis‐
play indicates that more options or
more text are available which can be
displayed by touching the relevant ar‐
row sensor .
A dotted line will appear under the last
option available in a list.
The OK sensor is used to confirm a
message or setting and also to move to
the next menu or another level.
A tick will appear beside the option
which is currently selected.
To exit a sub-menu, touch the sen‐
sor.
If you do not press any of the sensors
for several seconds, the display will re‐
turn to the previous level. You may
need to enter your settings again.
The touch on metal sensor buttons re‐
act to pressure and not simply to touch.
The
menu is used to alter
Settings
the dishwasher's electronics to suit
different requirements (see "Settings").
7