Setup and Operation
Remove reservoir
Step 3.
Install retainer and rotate clockwise
to secure. Connect HP4x to EFD
air-powered dispenser. Insert air
quick-connect into air outlet and
turn clockwise to lock.
Note:
Refer to EFD dispenser operating
instructions to control deposit size with
time and pressure.
Do not reuse reservoirs!
plunger clean (if necessary) before
installing a new reservoir.
For parts list, see back cover.
air cylinder
Step 1.
retainer.
reservoir retainer
ULTRA
reservoir system
dispensing tip
will turn red. Remove reservoir
Wipe
plunger
™
flange alignment
Changing Reservoirs
When a reservoir is empty,
the window in the air cylinder
retainer. Then, remove empty
reservoir and discard.
tip retaining cap
IMPORTANT: Confirm that a
white piston is between the
fluid and the plunger.
Step 2.
Install dispensing tip on
reservoir. Insert filled reservoir
into retainer and align flange
with slot as shown.
quick-connect
window
Changing Tips
Remove tip retaining cap and invert.
Align slot with wings on dispensing tip.
Turn tip retaining cap counterclockwise
to remove tip. Attach a new tip and
tighten tip retaining cap securely.