Clearaudio Performance DC User Manual page 6

Performance DC
User manual
2.1
Place the pre-mounted chassis on your hifi-rack or another suitable surface.
Performance DC
Pic. 2: chassis
2.2
To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided
ground cable into the hole of the screw from the bearing at the bottom side of the turntable.
Performance DC
Pic. 3: Grounding the bearing of the
2.3
Please remove the protective netting from the bearing shaft and place two drops of the synthetic
bearing oil on the ceramic bearing shaft. Slip the bearing top onto the bearing shaft of the
turntable.
Pic. 4: Bearing oil
Page 6  Clearaudio electronic GmbH 2014