Manual Message Waiting (Mmw) - Aastra 7433ip User Manual

IP P MX-ONE™
HONE FOR
10.2
10.2.1
10.2.2
71

Manual Message Waiting (MMW)

The Manual Message Waiting (MMW) feature enables you to send and
receive message waiting signals when the line is busy.
• MMW allows you to send a message waiting signal to an extension
that does not answer when you call (if this feature is allowed, this is
set by the system administrator).
• MMW allows you to receive a message waiting signal from
someone who has tried to contact you.
Calling the Party That Requested MMW
If there is a message waiting for you, "Messages" appears in the display,
and the indicator corresponding to
MMW, and to call this person, do the following:
1. Press .
New from [number or contact that left MMW] is selected.
2. Press Call.
The person who left the MMW is called.
or
1. Lift the handset and wait for the dial tone.
2. Dial *32#, or dial the number of the message retrieval center.
3. Replace the handset.
After the call, "Messages" still appears in the display, and the indicator is
still flashing. You have to remove the MMW indication manually.
To remove an MMW indication manually, do the following:
1. Press .
New from [number or contact that left MMW] is selected.
2. Press more....
3. Select Delete & Exit Messages, and press Select.
Ordering an MMW Indication
To order MMW to another extension, do the following:
1) Lift the handset and wait for a dial tone.
2) Dial * 31 * extension number #.
is flashing. To check who left the
6/1553-DBC 433 01 Uen D2 2014-03-26