Packing List Pre-Use Checklist 1: Introduction This is the User’s Manual is for the P4DA motherboard. Please read this chapter before you use your motherboard and identify which parts of the manual you will need to refer to, if any. Please pay particular attention to the Criti- cal Topics section.
○ ○ ○ ○ ○ ○ Packing List The P4DA motherboard package includes the following items: • P4DA motherboard • ATA-66/100/133 IDE connector cable Connects IDE devices to one of the onboard IDE connectors. • Floppy Disk Drive connector cable Connects floppy disk drives to the onboard floppy disk connector.
• Advanced Chipset features • Integrated Peripherals • Power Management Setup • PnP/PCI Configurations • PC Health Status • IWILL Smart Setting The main screen also has these command options: • Load Fail-Safe Defaults • Load Optimized Defaults • Set Password •...
Main Screen Click on the model name for this board in the Socket 478 section. Power Installer: P4DA Main Screen You can automatically in- stall the required chipset support by choosing “Auto Installation” or you can do all installations manually by choosing Manual In- stallation.
Page 79
○ ○ ○ ○ ○ ○ The P4DA installation screen screen will appear when you click on “Manual Installation”. Click on “Driver In- stallation” and the Driver Installation screen will appear. Power Installer: Drivers and Utilities Click on Driver Installation to access the driver instal- lation program.
To maximize perfor- mance, select a processor with the fastest clock speed the system budget or specification allows. The CMOS Setup Utility’s IWILL Smart Setting feature will automatically detect and configure whatever proces- sors are installed. Manual configuration is also available,...
Need help?
Do you have a question about the P4DA and is the answer not in the manual?
Questions and answers